Grass Seed Quantity Calculator

Estimate grass-seed quantity for a selected species and planting purpose.

Inputs

Preset: New tall fescue lawn

A new tall fescue lawn at 7 lb per 1,000 ft², within the Penn State Extension range of 6–8 lb. Bag mode assumes a 10 lb bag. This rate is not for overseeding or other grass species.

Seed weight - Project area (ft²), Seed rate per 1,000 square feet (lb/1,000 ft²)
Enter project area in ft².
Enter seed rate per 1,000 square feet in lb/1,000 ft².
Formula, inputs and conditions

Formula: Project area/1000*Seed rate per 1,000 square feet

Decimal results are displayed to two places when needed.

Inputs
Area, applicable seeding rate per 1,000 square feet, and bag weight.
Outputs
Pounds of seed and whole bags when the user supplies package weight.
Conditions and scope
Choose a rate for the intended grass and for new seeding or overseeding as appropriate. Use local guidance or product directions; the preset is an example. Results are planning estimates, not engineering, permit, code or contractor-price decisions.

Match grass seed rate to the job

Seed weight scales with area and the selected seeding rate. The relevant rate depends on the grass and whether the job is establishment or overseeding. This calculator applies a stated rate; it does not identify the best grass or rate for your location.

Measure and calculate

  1. Measure the net area to seed.
  2. Enter a rate in pounds per 1,000 square feet for the specific grass and application.
  3. Use bag mode to convert seed weight into whole packages.
Calculation method

Seed weight = area ÷ 1,000 × seeding rate.

A worked example

Inputs
The preset describes 1,000 ft² of new tall fescue lawn at 7 lb per 1,000 ft².
Calculation
1,000 ÷ 1,000 × 7 = 7 lb. In 10 lb bags, ceiling(7 ÷ 10) = 1 bag.
Result
7 lb

The theoretical application quantity is 7 lb even though the order is one 10 lb bag. A whole-bag purchase does not mean the entire bag should be spread on this area.

Read the result

Output interpretation and next steps
Output or checkWhat it means for your project
Seed to apply: lbThis is the area-scaled application quantity for your chosen grass and seeding purpose. It can be less than a full bag.
Seed to buy: bagsPurchase mode rounds to whole bags. Keep the calculated application weight separate from the amount in the package; unused seed is not an extra application allowance.

Common questions

Can I use this rate for overseeding?

Do not assume it transfers. Choose the rate for the seed mix and the actual job from the applicable label or local guidance.

Are seed weight and bag count interchangeable?

No. Bag count rounds the purchase upward. The application rate still determines how much seed belongs on the measured area.